New version
A robot that hitches your implements like a tractor: Category 2 three-point hitch, hydraulics and PTO. A 70 kWh battery to last the working day. Designed and built in France, in Aveyron.
From €129,000 excl. VAT
70 kWh
up to 12 h of work
1,600 kg
Cat. 2 hitch with float
540 rpm
PTO, 18 kW
±2 cm
RTK guidance
The idea
TOOGO is not a robot that comes with its own implements. It is a tool carrier: it hitches, carries and drives the implements already in your shed. Hoe, precision drill, harrow, cultivator, mulcher: if it fits a Category 2 three-point hitch, there is a good chance it will fit TOOGO.
The difference from a tractor is the layout. The implement is not hitched behind, it sits in the centre of the machine, between the wheels. It follows the ground with the machine, working depth stays even, and it never sticks out beyond the robot's footprint. Above it, a frame that shifts sideways to keep the implement on its line. Around it, a track width that opens and closes on demand.
And under the bodywork, a 70 kWh battery. No diesel, no engine oil changes, and a machine that lasts the working day.
New in 2.0
In 2024, the first TOOGO was shown at SIVAL in Angers. Since then, we have listened to the farmers who saw it work, and reworked the machine in depth.
Work rate
Hydraulic cylinders instead of electric actuators. The result: less dead time at headlands and a more precise implement on the row. And the new PTO, 540 rpm up to 18 kW, opens the door to powered implements: power harrow, rotary tiller, mulcher.
Run time
+75% battery capacity: up to 12 h of work depending on the implement and terrain. Fast charging from 0 to 90% in 2 h. 96 V lithium NMC, at least 80% of capacity retained after 7 years.
Versatility
The first TOOGO had none. The 2.0 gets Bosch Rexroth Load-Sensing hydraulics: 2 double-acting outlets, 1 single-acting, 50 l/min and a free return. Plus a hitch with float mode.
| TOOGO (SIVAL 2024) | TOOGO 2.0 | |
|---|---|---|
| Actuators | Electric | Hydraulic, 8× faster |
| Battery | 40 kWh | 70 kWh |
| Hydraulics | None | Load-Sensing, 50 l/min |
| Three-point hitch | Fixed | Float mode |
| Price | Unchanged: from €129,000 excl. VAT | |
Hitching
A robot that makes you replace your whole range of implements really costs far more than its price tag. TOOGO has the same interfaces as a mid-power tractor:
Drawbar pull: 18.5 kN. We check the compatibility of each implement with you (weight, width, power) before the demo.
Innovations
01
From 1.50 m to 2.20 m, set hydraulically in moments. Track open, TOOGO lines up with your beds and rows. Track closed, it narrows down to move from one field to the next or load onto a trailer. You change crops, not machines.
02
The wheels stay in their tracks; the frame and implement shift from left to right. As standard, GPS side-shift continuously corrects small guidance deviations. As an option, a camera reads the row and the implement follows the planting, even when it is not straight.
03
Two ways to pick up the implement. Reversing onto it, track wide open, like a tractor. Or crabbing: all four wheels steer to 90° and the whole machine slides sideways up to the implement. The automatic hooks do the rest.
Architecture
Precision. Hitched between the wheels, the implement follows the machine's movements exactly. The suspension spreads the weight over all four wheels: no bottoming out, and an even working depth from one end of the row to the other.
Safety. Nothing sticks out beyond the robot's footprint. No tines sweeping the headland, no risk of catching a post, a fence or a pedestrian.
Accessibility. The chassis is open at the top, sides and rear. You can see what you are hitching, you adjust standing up, and there is room left for large implements. 670 mm of ground clearance.
Robustness. No sensitive or expensive component is fitted on the outside of the machine: a major design difference that protects TOOGO from knocks as well as theft. It can be washed with a pressure washer (below 60 °C).
In the field
A precision drill on the three-point hitch, on a prepared field. RTK guidance holds the line, row after row.
Safety
Theft and damage
Every component is enclosed: nothing sensitive or expensive is exposed to theft or damage. Plus GPS tracking and remote locking.
Autonomy
Today, TOOGO carries out its missions on its own, guided to ±2 cm, but an operator must stay on site to supervise the machine.
Tomorrow, unsupervised mode, currently going through certification, will arrive as a free update. No new machine to buy: yours evolves.
Missions are planned and monitored in SIZ'App, on a computer, tablet or phone: field, implement, route, then live progress, duration and battery.
Technical data
Specification sheet dated 13 April 2026, non-contractual document.
| Length | 4,000 mm |
|---|---|
| Width | 1,850 to 2,550 mm depending on track width |
| Height | 1,900 mm |
| Ground clearance | 670 mm |
| Track width | 1.50 m to 2.20 m, hydraulic adjustment |
| Unladen weight | 2,300 kg |
| Speed | 6 km/h maximum, in autonomous work and under remote control |
|---|---|
| Drawbar pull | 18.5 kN |
| Three-point hitch | Category 2, 1,600 kg, automatic hooks, float, 500 mm travel |
| PTO | 540 rpm, up to 18 kW |
| Hydraulics | Bosch Rexroth Load-Sensing: 2 DA + 1 SA, 50 l/min max., free return |
| Electrical socket | 96 V and 24 V |
| Battery | 96 V lithium NMC, 70 kWh usable, ≥ 80% after 7 years |
|---|---|
| Charging | 0 to 90% in 2 h, 160 A or 320 A REMA DC socket |
| Run time | Up to 12 h (hoeing or drilling at 4 km/h, average 8% slope) |
| Drive | 2 driven front wheels, 24 kW, energy recovery downhill, planetary reduction gears |
| Hydraulics | Steering, three-point hitch and auxiliary functions |
| Navigation | 2 RTK GNSS receivers ±2 cm, 3 six-axis inertial measurement units |
|---|---|
| Steering | 2 independent steered front wheels, zero-turn and Ackermann, turning circle < 6 m |
| Implement | GPS side-shift as standard, camera guidance optional |
| Tyres | Alliance Agristar II radials: front 260/70 R 20, rear 240/70 R 16 |
| Remote control | Included, 250 m range, IP65 |
| Contact | Safety bumpers all round |
|---|---|
| Distance | Multi-layer 3D LiDAR |
| Emergency stops | 4 on the machine, 1 wireless |
| Geofence | GPS geofencing |
| Water and dust | Pressure washer < 60 °C, sealed internal components |
| Service life | Estimated at more than 8 years |
|---|---|
| Parts and updates | Available for 10 years, many standard parts |
| Commissioning | On-site training, field mapping |
| Support | 24/7 hotline, inspection before each season |
| Origin | Designed and built in France |
Need the spec sheet as a PDF? Get it by email from the home page.
TOOGO drives at 6 km/h maximum. The gain comes from the actuators: hydraulic, they are 8 times faster than the first generation's electric actuators. Less dead time at headlands, a more precise implement on the row.
Measured hoeing or drilling at 4 km/h on an average 8% slope. A PTO-driven implement uses more energy: run time depends on the implement and the terrain. Fast charging takes the battery from 0 to 90% in 2 h.
No. Everything is included in the purchase price, with no RTK subscription and no hidden costs.
GPS side-shift of the central frame is standard. Camera guidance of the implement, which reads the row, is available as an option.
Not yet. Today, autonomous operation requires an operator on site to supervise the machine. Unsupervised mode is going through certification and will be offered as a free update.
With the track width closed up hydraulically, TOOGO loads onto a flatbed trailer. High-mounted lifting hooks also let you lift it for handling. Over short distances, you drive it by remote control at up to 6 km/h.
See it working on your farm?
A demo on your farm, with your implements.
